| Contamination Control & Monitoring Services
The Fluid Service Program offered by Hendrix Engineering, Inc. is a hydraulic proactive maintenance program that does the following:
|
| Assesses...
- Lubricant contamination level in real-time
- Lubricant condition through bottle sampling (wear particles, water-content, chemical characteristics)
- Pump case temperatures
- Accumulator precharge pressure
- Filter clogging indicators
- Overall condition of hydraulic power unit
Recommends...
- Proper contamination level of lubricant
- Pump case drain flows and temperatures
- Reservoir temperatures
- Filter change-out intervals
- Upgrades to existing hydraulic systems and practices
Maintains...
- Maintains the above recommendations and assessments to insure optimal hydraulic system life and machine life.
|
| Basic Services:
- On-line particle count analysis of your hydraulic system via the Hydac FCU
- Temperature of Reservoir and Pump case
- Overall condition of the Hydraulic Unit; e.g., gages, filter indicators, hoses, etc.
- System recommendations
- Documentation in customer preferred format
- Recommended Fluid Service Interval
Additional Services:
- Bottle Sampling
- On-site Fluid Cleaning and Water removal
- Pump case drain flow detection
- Installing diagnostic fittings
- Changing breathers/filters, etc.
- Check and charge accumulators
- Installations, e.g., off-line filter/cooling solutions, etc.
Note: Above "Additional Services" are quoted on an individual basis.
|
|